Info: 'The Kaiser shaping parameter will be yh.huh.'
2:
Bounds: x1=7, y1=14, x2=263, y2=32
Type: -120
Info: 'At a sample rate of dehr Hz:'
3:
Bounds: x1=7, y1=74, x2=301, y2=90
Type: -120
Info: 'The zero-padding factor will be foo.bar.'
DITL_152_Capture Range DITL.txt
Items: (6 entries)
0:
Bounds: x1=72, y1=91, x2=169, y2=124
Type: 4
Info: 'Make it so.'
1:
Bounds: x1=235, y1=91, x2=332, y2=124
Type: 4
Info: 'Nevermind.'
2:
Bounds: x1=122, y1=57, x2=197, y2=73
Type: 16
Info: '<cap rng>'
3:
Bounds: x1=7, y1=11, x2=335, y2=45
Type: -120
Info: 'Specify the maximum allowed deviation in track frequency over the duration of a frame.'
4:
Bounds: x1=7, y1=57, x2=119, y2=73
Type: -120
Info: 'Frequency drift:'
5:
Bounds: x1=203, y1=57, x2=390, y2=77
Type: -120
Info: 'percent of track frequency.'
DITL_151_Threshold DITL.txt
Items: (12 entries)
0:
Bounds: x1=40, y1=152, x2=137, y2=185
Type: 4
Info: 'Make it so.'
1:
Bounds: x1=203, y1=152, x2=300, y2=185
Type: 4
Info: 'Nevermind.'
2:
Bounds: x1=177, y1=49, x2=252, y2=65
Type: 16
Info: '<thresh>'
3:
Bounds: x1=177, y1=83, x2=252, y2=99
Type: 16
Info: '<range>'
4:
Bounds: x1=205, y1=120, x2=280, y2=136
Type: 16
Info: '<hyst>'
5:
Bounds: x1=13, y1=14, x2=335, y2=37
Type: -120
Info: 'Specify the spectral peak amplitude threshold.'
6:
Bounds: x1=13, y1=50, x2=160, y2=65
Type: -120
Info: 'Track Birth Threshold:'
7:
Bounds: x1=13, y1=84, x2=166, y2=99
Type: -120
Info: 'Peak Amplitude Range:'
8:
Bounds: x1=13, y1=119, x2=201, y2=136
Type: -120
Info: 'Track Amplitude Hysteresis:'
9:
Bounds: x1=259, y1=49, x2=285, y2=65
Type: -120
Info: 'dB.'
10:
Bounds: x1=260, y1=83, x2=285, y2=99
Type: -120
Info: 'dB.'
11:
Bounds: x1=288, y1=120, x2=313, y2=136
Type: -120
Info: 'dB.'
DITL_149_Analysis Window DITL.txt
Items: (10 entries)
0:
Bounds: x1=38, y1=182, x2=135, y2=215
Type: 4
Info: 'Make it so.'
1:
Bounds: x1=201, y1=182, x2=298, y2=215
Type: 4
Info: 'Nevermind.'
2:
Bounds: x1=131, y1=76, x2=191, y2=92
Type: 16
Info: '<ATT>'
3:
Bounds: x1=131, y1=107, x2=191, y2=123
Type: 16
Info: '<width>'
4:
Bounds: x1=12, y1=23, x2=337, y2=60
Type: -120
Info: 'Specify the sidelobe attenuation and the main lobe width for the analysis window.'
5:
Bounds: x1=12, y1=74, x2=125, y2=92
Type: -120
Info: 'First sidelobe is:'
6:
Bounds: x1=12, y1=106, x2=102, y2=123
Type: -120
Info: 'Main lobe is:'
7:
Bounds: x1=198, y1=74, x2=334, y2=92
Type: -120
Info: 'dB below main lobe.'
8:
Bounds: x1=198, y1=107, x2=300, y2=123
Type: -120
Info: 'hertz wide.'
9:
Bounds: x1=12, y1=145, x2=329, y2=163
Type: 5
Info: 'Compute Window Parameters Automatically'
DITL_148_Frame Length DITL.txt
Items: (7 entries)
0:
Bounds: x1=23, y1=138, x2=120, y2=171
Type: 4
Info: 'Make it so.'
1:
Bounds: x1=186, y1=138, x2=283, y2=171
Type: 4
Info: 'Nevermind.'
2:
Bounds: x1=107, y1=63, x2=207, y2=78
Type: 16
Info: '<frame length>'
3:
Bounds: x1=23, y1=100, x2=216, y2=118
Type: 5
Info: 'Use SOS frame length.'
4:
Bounds: x1=6, y1=24, x2=304, y2=50
Type: -120
Info: 'Specify the time between analysis spectra.'
5:
Bounds: x1=6, y1=62, x2=100, y2=78
Type: -120
Info: 'Frame length:'
6:
Bounds: x1=216, y1=62, x2=306, y2=78
Type: -120
Info: 'milliseconds.'
DITL_146_Synthesis Scaling.txt
Items: (4 entries)
0:
Bounds: x1=69, y1=108, x2=201, y2=147
Type: 4
Info: 'Make it so.'
1:
Bounds: x1=220, y1=33, x2=257, y2=49
Type: 16
Info: '1.0'
2:
Bounds: x1=38, y1=69, x2=238, y2=87
Type: 5
Info: 'Auto-Normalize Synthesis'
3:
Bounds: x1=10, y1=33, x2=210, y2=49
Type: -120
Info: 'Scale Synthesis Amplitude by:'
DITL_144_File Replay DITL.txt
Items: (3 entries)
0:
Bounds: x1=82, y1=20, x2=211, y2=51
Type: 4
Info: 'I'm done, thanks.'
1:
Bounds: x1=82, y1=63, x2=211, y2=94
Type: 4
Info: 'Play it again, Sam.'
2:
Bounds: x1=10, y1=27, x2=74, y2=91
Type: -96
Info: ' Å'
DITL_143_Frequency Shift.txt
Items: (4 entries)
0:
Bounds: x1=115, y1=108, x2=206, y2=139
Type: 4
Info: 'Make It So.'
1:
Bounds: x1=238, y1=31, x2=297, y2=48
Type: 16
Info: 'cow'
2:
Bounds: x1=23, y1=70, x2=297, y2=88
Type: 5
Info: ' Read Frequency Shift from AIFF file.'
3:
Bounds: x1=23, y1=30, x2=208, y2=48
Type: -120
Info: 'Frequency Shift (in Hertz):'
DITL_142_Frequency Scaling.txt
Items: (4 entries)
0:
Bounds: x1=115, y1=108, x2=206, y2=139
Type: 4
Info: 'Make It So.'
1:
Bounds: x1=238, y1=31, x2=297, y2=48
Type: 16
Info: 'cow'
2:
Bounds: x1=23, y1=70, x2=297, y2=88
Type: 5
Info: ' Read Frequency Scale from AIFF file.'
3:
Bounds: x1=23, y1=30, x2=208, y2=48
Type: -120
Info: 'Frequency Scale Multiplier:'
DITL_141_Time Scaling.txt
Items: (4 entries)
0:
Bounds: x1=93, y1=108, x2=184, y2=139
Type: 4
Info: 'Make It So.'
1:
Bounds: x1=197, y1=30, x2=256, y2=47
Type: 16
Info: 'cow'
2:
Bounds: x1=20, y1=71, x2=256, y2=89
Type: 5
Info: ' Read Time Scale from AIFF file.'
3:
Bounds: x1=20, y1=29, x2=168, y2=47
Type: -120
Info: 'Time Scale Multiplier:'
DITL_140_Get File DITL.txt
Items: (11 entries)
0:
Bounds: x1=256, y1=138, x2=336, y2=156
Type: 4
Info: 'Open'
1:
Bounds: x1=59, y1=1152, x2=77, y2=1232
Type: 4
Info: ''
2:
Bounds: x1=256, y1=163, x2=336, y2=181
Type: 4
Info: 'Cancel'
3:
Bounds: x1=232, y1=39, x2=347, y2=59
Type: -128
Info: ''
4:
Bounds: x1=256, y1=68, x2=336, y2=86
Type: 4
Info: 'Eject'
5:
Bounds: x1=256, y1=93, x2=336, y2=111
Type: 4
Info: 'Drive'
6:
Bounds: x1=12, y1=39, x2=230, y2=185
Type: 0
Info: ''
7:
Bounds: x1=229, y1=39, x2=246, y2=185
Type: 0
Info: ''
8:
Bounds: x1=252, y1=124, x2=340, y2=125
Type: -128
Info: ''
9:
Bounds: x1=20, y1=1044, x2=116, y2=1145
Type: -120
Info: ''
10:
Bounds: x1=13, y1=195, x2=371, y2=223
Type: -120
Info: '^1'
DITL_139_Control File Creator.txt
Items: (9 entries)
0:
Bounds: x1=50, y1=241, x2=161, y2=280
Type: 4
Info: 'Create!'
1:
Bounds: x1=240, y1=241, x2=351, y2=280
Type: 4
Info: 'Never mind.'
2:
Bounds: x1=30, y1=107, x2=330, y2=123
Type: 16
Info: '0.0 0.5 1.0'
3:
Bounds: x1=30, y1=167, x2=330, y2=183
Type: 16
Info: '0.0 1.0 0.0'
4:
Bounds: x1=50, y1=209, x2=205, y2=226
Type: 6
Info: 'Linear Interpolation'
5:
Bounds: x1=240, y1=209, x2=351, y2=227
Type: 6
Info: 'Step Function'
6:
Bounds: x1=30, y1=12, x2=350, y2=64
Type: -120
Info: 'Specify the time points and corresponding amplitude points for the control envelope. Lemur will create an 8 bit 1 kHz control file.'
7:
Bounds: x1=30, y1=84, x2=196, y2=100
Type: -120
Info: 'Time Points: (seconds)'
8:
Bounds: x1=30, y1=144, x2=329, y2=159
Type: -120
Info: 'Amplitude Points: (floating point numbers)'
DITL_138_Sample Size.txt
Items: (4 entries)
0:
Bounds: x1=93, y1=108, x2=184, y2=139
Type: 4
Info: 'Make It So.'
1:
Bounds: x1=48, y1=66, x2=123, y2=84
Type: 6
Info: '8 bits'
2:
Bounds: x1=150, y1=66, x2=231, y2=84
Type: 6
Info: '16 bits'
3:
Bounds: x1=33, y1=29, x2=243, y2=47
Type: -120
Info: 'Sample Size for Synthesis File:'
DITL_137_Fundamental Freq Error DITL.txt
Items: (2 entries)
0:
Bounds: x1=40, y1=165, x2=312, y2=189
Type: 4
Info: 'Leave me alone. Don't even look at me.'
1:
Bounds: x1=10, y1=8, x2=371, y2=110
Type: -120
Info: 'You must specify the fundamental frequency for each Lemur analysis file if you want to perform SOS interpolation. Please choose a resonable fundamental frequency (between 10 and 10000 hertz) for this file.'
DITL_136_SOS fundamental freq DITL.txt
Items: (7 entries)
0:
Bounds: x1=45, y1=167, x2=160, y2=199
Type: 4
Info: 'Synthesize now.'
1:
Bounds: x1=201, y1=167, x2=316, y2=199
Type: 4
Info: 'Blow this off.'
2:
Bounds: x1=54, y1=135, x2=306, y2=156
Type: 4
Info: 'Select another file for interpolation.'
3:
Bounds: x1=134, y1=102, x2=195, y2=119
Type: 16
Info: ''
4:
Bounds: x1=15, y1=64, x2=300, y2=92
Type: -120
Info: 'Fundamental frequency for blah:'
5:
Bounds: x1=6, y1=4, x2=354, y2=57
Type: -120
Info: 'If you would like to perform SOS interpolation between several Lemur files, then you must specify the fundamental frequency for each Lemur file.'
6:
Bounds: x1=202, y1=103, x2=277, y2=119
Type: -120
Info: 'Hertz'
DITL_135_Sample Rate.txt
Items: (4 entries)
0:
Bounds: x1=93, y1=108, x2=184, y2=139
Type: 4
Info: 'Make It So.'
1:
Bounds: x1=184, y1=30, x2=256, y2=47
Type: 16
Info: 'cow'
2:
Bounds: x1=20, y1=71, x2=256, y2=89
Type: 5
Info: 'Use sample rate from analysis.'
3:
Bounds: x1=20, y1=29, x2=168, y2=47
Type: -120
Info: 'Sample Rate in Hertz:'
DITL_134_Confirm Update DITL.txt
Items: (4 entries)
0:
Bounds: x1=155, y1=123, x2=226, y2=153
Type: 4
Info: 'Forget it.'
1:
Bounds: x1=34, y1=123, x2=105, y2=153
Type: 4
Info: 'Update it.'
2:
Bounds: x1=13, y1=19, x2=247, y2=55
Type: -120
Info: 'You have an old analysis file. I can update it for you.'
3:
Bounds: x1=13, y1=58, x2=255, y2=113
Type: -120
Info: 'The updater will modify your Lemur analysis file. Please make a backup copy before updating.'
DITL_133_Control File Defaults.txt
Items: (7 entries)
0:
Bounds: x1=129, y1=147, x2=234, y2=179
Type: 4
Info: 'Make It So.'
1:
Bounds: x1=298, y1=24, x2=359, y2=40
Type: 16
Info: '0'
2:
Bounds: x1=298, y1=63, x2=359, y2=79
Type: 16
Info: '0'
3:
Bounds: x1=298, y1=98, x2=359, y2=114
Type: 16
Info: '0'
4:
Bounds: x1=13, y1=24, x2=225, y2=40
Type: -120
Info: 'Maximum Time Scale From File:'
5:
Bounds: x1=13, y1=63, x2=263, y2=79
Type: -120
Info: 'Maximum Frequency Scale From File:'
6:
Bounds: x1=13, y1=98, x2=290, y2=113
Type: -120
Info: 'Maximum Frequency Shift From File (Hz):'
DITL_132_Pre-Filter DITL.txt
Items: (12 entries)
0:
Bounds: x1=35, y1=239, x2=132, y2=272
Type: 4
Info: 'Make it so.'
1:
Bounds: x1=189, y1=239, x2=286, y2=272
Type: 4
Info: 'Nevermind.'
2:
Bounds: x1=116, y1=82, x2=160, y2=99
Type: 16
Info: 'length'
3:
Bounds: x1=172, y1=112, x2=227, y2=128
Type: 16
Info: 'step'
4:
Bounds: x1=248, y1=143, x2=303, y2=159
Type: 16
Info: 'delay'
5:
Bounds: x1=248, y1=172, x2=303, y2=188
Type: 16
Info: 'period'
6:
Bounds: x1=14, y1=202, x2=310, y2=220
Type: 5
Info: 'Generate Noise (samples) File From Filter'
7:
Bounds: x1=13, y1=5, x2=288, y2=74
Type: -120
Info: 'Lemur can pre-filter the analysis input signal using an adaptive noise cancellor to remove noise components. If the filter length is zero, no filtering is used.'
8:
Bounds: x1=13, y1=82, x2=110, y2=98
Type: -120
Info: 'Filter Length:'
9:
Bounds: x1=13, y1=111, x2=166, y2=129
Type: -120
Info: 'Coefficient Step Size:'
10:
Bounds: x1=13, y1=143, x2=237, y2=160
Type: -120
Info: 'Decorrelating Delay (in samples):'
11:
Bounds: x1=13, y1=172, x2=218, y2=188
Type: -120
Info: 'Adaption Period (in samples):'
DITL_131_Puddin' Head.txt
Items: (4 entries)
0:
Bounds: x1=30, y1=190, x2=139, y2=239
Type: 4
Info: 'Just kidding,I'll try again '
1:
Bounds: x1=180, y1=190, x2=289, y2=239
Type: 4
Info: 'No, really,I'm serious!'
2:
Bounds: x1=41, y1=68, x2=277, y2=178
Type: -120
Info: '^2'
3:
Bounds: x1=170, y1=20, x2=280, y2=38
Type: -120
Info: 'PUDDIN' HEAD!!!'
DITL_130_Edification.txt
Items: (3 entries)
0:
Bounds: x1=68, y1=61, x2=209, y2=87
Type: 4
Info: 'Thanks for playing.'
1:
Bounds: x1=58, y1=16, x2=250, y2=48
Type: -120
Info: '^2'
2:
Bounds: x1=15, y1=15, x2=47, y2=47
Type: -96
Info: ' Ä'
DITL_129_Excitement.txt
Items: (3 entries)
0:
Bounds: x1=106, y1=155, x2=242, y2=184
Type: 4
Info: 'More Excitement!'
1:
Bounds: x1=76, y1=193, x2=272, y2=222
Type: 4
Info: 'No More Excitement, Please.'
2:
Bounds: x1=33, y1=10, x2=315, y2=146
Type: -120
Info: '^3'
DITL_128_"Eat It" Box.txt
Items: (5 entries)
0:
Bounds: x1=150, y1=10, x2=237, y2=48
Type: 4
Info: 'Eat it.'
1:
Bounds: x1=15, y1=70, x2=244, y2=147
Type: -120
Info: '^0'
2:
Bounds: x1=15, y1=150, x2=244, y2=167
Type: -120
Info: '^1'
3:
Bounds: x1=15, y1=10, x2=47, y2=42
Type: -96
Info: ' '
4:
Bounds: x1=4, y1=178, x2=258, y2=210
Type: -120
Info: 'Please report this error to the author. (k-fitz@uiuc.edu)'
